Search results for "Turbulence kinetic energy"

showing 10 items of 20 documents

Turbulent jet through porous obstructions under Coriolis effect: an experimental investigation

2021

AbstractThe present study has the main purpose to experimentally investigate a turbulent momentum jet issued in a basin affected by rotation and in presence of porous obstructions. The experiments were carried out at the Coriolis Platform at LEGI Grenoble (FR). A large and unique set of velocity data was obtained by means of a Particle Image Velocimetry measurement technique while varying the rotation rate of the tank and the density of the canopy. The main differences in jet behavior in various flow configurations were assessed in terms of mean flow, turbulent kinetic energy and jet spreading. The jet trajectory was also detected. The results prove that obstructions with increasing density…

010504 meteorology & atmospheric sciencesComputational MechanicsGeneral Physics and AstronomyRotation01 natural sciencesSettore ICAR/01 - Idraulica010305 fluids & plasmasPhysics::Fluid DynamicsMomentumCorioli0103 physical sciencesMean flow0105 earth and related environmental sciencesFluid Flow and Transfer ProcessesPhysicsJet (fluid)[SDE.IE]Environmental Sciences/Environmental EngineeringTurbulence[SPI.FLUID]Engineering Sciences [physics]/Reactive fluid environmentexperimentsMechanicsParticle image velocimetry13. Climate actionMechanics of MaterialsDragturbulent jetTurbulence kinetic energyExperiments in Fluids
researchProduct

A numerical model of the cloud-topped planetary boundary-layer: Radiation, turbulence and spectral microphysics in marine stratus

1996

A numerical model of the cloud-topped planetary boundary-layer is presented. The model is one-dimensional with special emphasis on a detailed description of cloud microphysical processes. Aerosols and cloud droplets are treated in a two-dimensional particle-distribution whereby the activation of aerosols is calculated explicitly by solving the droplet-growth equation at all relative humidities. Atmospheric radiation is determined with a δ-two-stream radiation scheme. Turbulent fluxes are parametrized as a function of the turbulent kinetic energy. Numerical results are presented which are obtained by utilizing measurements made over the North Sea. The interaction between radiation, turbulenc…

Atmospheric ScienceMicrophysicsComputer simulationMeteorologyPlanetary boundary layerTurbulencebusiness.industryCloud computingRadiationComputational physicsTurbulence kinetic energyEnvironmental sciencebusinessNorth seaPhysics::Atmospheric and Oceanic PhysicsQuarterly Journal of the Royal Meteorological Society
researchProduct

Surface to boundary layer coupling in the urban area of Lisbon comparing different urban canopy models in WRF

2019

Abstract This work presents a sensitivity study to evaluate different Urban Canopy Models (UCM) existing within the Weather Research and Forecasting Model (WRF) in the urban area of Lisbon, Portugal. Several hind-cast simulations were carried out for a selected period in July 2010, in which synoptic conditions favoured urban heat island formation. We aim to gain knowledge on the feedback of modified urban canopy representation in WRF on local scale meteorology and the boundary-layer dynamics over the urban area, by comparing a single layer urban canopy model (SLUCM) and a more sophisticated multi-layer building effect parametrisation (BEP). We find significant differences in the characteris…

CanopyAtmospheric Sciencegeographygeography.geographical_feature_category010504 meteorology & atmospheric sciencesUrban climatologyGeography Planning and Development010501 environmental sciencesEnvironmental Science (miscellaneous)Atmospheric sciencesUrban area01 natural scienceslaw.inventionUrban StudiesBoundary layerlawWeather Research and Forecasting ModelTurbulence kinetic energyRadiosondeEnvironmental scienceUrban heat island0105 earth and related environmental sciencesUrban Climate
researchProduct

Closure to “Analyzing Turbulence Intensity in Gravel Bed Channels” by F. G. Carollo, V. Ferro, and D. Termini

2008

Closure (computer programming)TurbulenceMechanical EngineeringTurbulence kinetic energyGeometryGeomorphologyGeologyWater Science and TechnologyCivil and Structural EngineeringJournal of Hydraulic Engineering
researchProduct

Reduction of scouring downstream of a rigid bed by means of a vegetated carpet: experimental investigation in a laboratory flume

2016

Vegetation is a critical component of aquatic ecosystems and exerts an important role in river morphodynamics. This paper describes the results of laboratory study carried out to investigate the role of vegetation on flow field and erosion process developing in non-equilibrium situations. Particular attention is paid to scour evolving downstream of a rigid bed and to the effect of a vegetated carpet used as a protective measure against scouring. The reported experimental study shows that the introduction of the vegetated carpet results in a more favourable configuration than in its absence determining reduced values of flow velocity, turbulence intensity and bed shear stress, and modifying …

HydrologyHydrogeologyVegetation010504 meteorology & atmospheric sciencesLaboratory measurement0208 environmental biotechnologyFlow (psychology)02 engineering and technology01 natural sciences020801 environmental engineeringFlumeFlow velocityFlow velocityTurbulence kinetic energyErosionShear stressEnvironmental scienceEnvironmental ChemistryGeotechnical engineeringBed scouringBeach morphodynamics0105 earth and related environmental sciencesWater Science and Technology
researchProduct

Flow Velocity Measurements in Vegetated Channels

2002

Understanding of the hydraulics of flow over vegetation is very important to support the management of fluvial processes. In this paper the flow over flexible bottom vegetation is experimentally studied. A two-dimensional-acoustic doppler velocimeter is used to measure the local flow velocities for different vegetation concentrations, discharges, and flume slopes. The influence of vegetation concentration and the depth/vegetation height ratio on the measured velocity profiles is analyzed. All measured velocity distributions are S-shaped and exhibit a three-zone profile. The relationship between the velocity distribution and the turbulence intensity distribution is also analyzed. The charact…

HydrologyTurbulenceMechanical EngineeringPrandtl numberGeometryFlow measurementPhysics::GeophysicsOpen-channel flowPhysics::Fluid DynamicsFlumesymbols.namesakeFlow velocityTurbulence kinetic energysymbolsmedicineTURBULENCEmedicine.symptomVegetation (pathology)RESISTANCEGeologyCOEFFICIENTSWater Science and TechnologyCivil and Structural EngineeringJournal of Hydraulic Engineering
researchProduct

Effects of Onshore and Offshore Environmental Parameters on the Leading Edge Erosion of Wind Turbine Blades: A Comparative Study

2021

Abstract The presence of rain-induced leading edge erosion of wind turbine blades (WTBs) necessitates the development of erosion models. One of the essential parameters for erosion modeling is the relative impact velocity between rain droplets and the rotating blade. Based on this parameter, the erosion damage rate of a WTB is calculated to estimate the expected leading edge lifetime. The environmental conditions that govern this parameter have site-specific variations, and thus, rain and wind loading on a turbine differ for onshore and offshore locations. In addition, there are wave loads present in the offshore environment. The present paper tries to provide guidelines for erosion modelin…

Leading edgeOcean energy technologyTurbine blade020209 energyOcean Engineering02 engineering and technology01 natural sciencesTurbine010305 fluids & plasmaslaw.inventionSea breezelaw0103 physical sciences0202 electrical engineering electronic engineering information engineeringGeotechnical engineeringDesign of offshore structuresWind powerbusiness.industryMechanical EngineeringOffshore material performance and applicationsTurbulence kinetic energyErosionEnvironmental scienceSubmarine pipelinebusinessLeading edge erosionJournal of Offshore Mechanics and Arctic Engineering
researchProduct

Experimental analysis of cross-sectional flow motion in a large amplitude meandering bend

2010

Flow in meandering bends is characterized by the formation of a large cross-sectional central-region circulation cell. The width-to-depth ratio is one of the most important parameters affecting the entity of the cross-circulation motion. In steep outside bends, beside the central-region cell, a counter-rotating circulation cell often forms in the upper part of the outer-bank. In spite of its practical importance, the evolving mechanisms of both the circulation cells and their role on boundary shear stress distribution in bends are not yet fully understood. The aim of the present paper is to gain some insight into how cross-sectional flow motion evolves along meandering bends. Experiments ha…

MeteorologyGeography Planning and DevelopmentFlow (psychology)FluxMechanicsSecondary flowSettore ICAR/01 - Idraulicacanali meandriformi curvatura della corrente topografia del fondo corrente secondaria energia cineticaAmplitudeCirculation (fluid dynamics)Flow velocityTurbulence kinetic energyEarth and Planetary Sciences (miscellaneous)Shear stressGeologyEarth-Surface ProcessesEarth Surface Processes and Landforms
researchProduct

Experimental Analysis of Horizontal Turbulence of Flow over Flat and Deformed Beds

2015

Abstract Laboratory experiments in a straight flume were carried out to examine the evolution of large-scale horizontal turbulent structures under flat-bed and deformed-bed conditions. In this paper, the horizontal turbulence of flow under these conditions is analyzed and compared. The conditioned quadrant method is applied to verify the occurrence of turbulent events. The distributions of horizontal Reynolds shear stress and turbulent kinetic energy are also presented and discussed. Results show the occurrence of an “initial” sequence of horizontal vortices whose average spatial length scales with the channel width. Under deformed-bed conditions, this spatial length does not change.

MeteorologyTurbulenceK-epsilon turbulence modelFlow (psychology)Bed formBurst cycleMechanicsLaboratory experimentVortexOpen-channel flowQuadrant (plane geometry)Physics::Fluid DynamicsFlumeFlow turbulence structureTurbulence kinetic energyOpen-channel flowGeologyWater Science and TechnologyCivil and Structural EngineeringArchives of Hydro-Engineering and Environmental Mechanics
researchProduct

Computational and experimental studies of the flow field near the beam entrance window of a liquid metal target

2014

Abstract After the first world liquid metal target has been successfully operated at the SINQ facility at the Paul Scherrer Institut (PSI) for 6 months. The idea of having a reliable target with a bypass flow for cooling the beam entrance window, but with the bypass flow not driven by a separate pump, was examined within the project called LIMETS (Liquid Metal Target for SINQ). In designing of liquid metal targets, turbulence modelling is of high importance due to lack in methods for measuring the spatial distribution of flow and turbulence characteristics. In this study, validation of different turbulence models were performed in water model with hemispherical geometry using particle image…

Nuclear and High Energy PhysicsEngineeringLiquid metalbusiness.industryTurbulenceWater flowK-epsilon turbulence modelMechanical EngineeringMechanicsPhysics::Fluid DynamicsOpticsNuclear Energy and EngineeringParticle image velocimetryTurbulence kinetic energyGeneral Materials ScienceSafety Risk Reliability and QualitybusinessReynolds-averaged Navier–Stokes equationsWaste Management and DisposalLarge eddy simulationNuclear Engineering and Design
researchProduct